DC – 40GHz Extreme iBW Receivers
ADVANCED is introducing the EiBW40 receiver suite with extreme instantaneous bandwidth covering all frequencies up to 40 GHz that had been proven to detect hundreds of simultaneous incoming threats. The suite’s modules are fully integrated from antenna to bits.
The EiBW40 Suite integrates 3 modules: 4 channels front-end receiver and multiple converting channels that supports extreme sampling power.
4 x 12GHz iBW (Instantaneous bandwidth) is supported in the 18-40 GHz range and 16 GHz iBW for 2-18 GHz range, a 400MHz – 2 GHz Pass Through channel supports the lower bands. This capability eliminates the need for sweeping/scanning methods, thus, enables ZERO Blind Spot capability. Transmitting capabilities are also available to counterattack the incoming threats. ADVANCED is bringing these high-end EMSO (EW) solutions into new use cases, by reducing the SWaP-C to support smaller platforms. The suite is supported in a 3U or 6U VPX form factors and compatible with SOSA™. The Front-End module is hermetically laser sealed to sustain the harshest environments
ADVANCED is introducing the EiBW40 receiver suite with extreme instantaneous bandwidth covering all frequencies up to 40 GHz that had been proven to detect hundreds of simultaneous incoming threats. The suite’s modules are fully integrated from antenna to bits.
The EiBW40 Suite integrates 3 modules: 4 channels front-end receiver and multiple converting channels that supports extreme sampling power.
4 x 12GHz iBW (Instantaneous bandwidth) is supported in the 18-40 GHz range and 16 GHz iBW for 2-18 GHz range, a 400MHz – 2 GHz Pass Through channel supports the lower bands. This capability eliminates the need for sweeping/scanning methods, thus, enables ZERO Blind Spot capability. Transmitting capabilities are also available to counterattack the incoming threats. ADVANCED is bringing these high-end EMSO (EW) solutions into new use cases, by reducing the SWaP-C to support smaller platforms. The suite is supported in a 3U or 6U VPX form factors and compatible with SOSA™. The Front-End module is hermetically laser sealed to sustain the harshest environments
EiBWs-x014
18-40 GHz Front-End Module series
Receive Specifications
- 4 x RF inputs
- 18 GHz – 40 GHz
- 4 x RF outputs
- 18 GHz – 40 GHz
- iBW: 22GHz
- SFDR: > 80dBc
- Gain: 15dB +/-5dB
- Noise Figure: < 10dB
- IIP1: -5dBm
- IIP3: +10dBm
- Switching Time: 100 ns
- Internal BIT
General Specifications
- Environmental: MIL-STD-810F
- Laser Sealed
- EMI/EMC: MIL-STD-461F
- Power consumption: 10W
- Operating: -40⁰ C t0 +85⁰ C
- Conduction Cooled
- Dimensions: 80x80x20 mm
EiBWs-x013
18-40 GHz Down Converter Series
Receive Specifications
- 16 x RF inputs
- 18GHz to 40GHz
- 4 x RF outputs
- 6GHz-18GHz
- iBW: 4 x 12GHz
- SFDR: > 60dBc
- Gain: 20dB +/-5dB
- Gain Control: 0-60dB, 0.5dB steps
- Noise Figure: < 20dB
- IIP1: -10dBm
- IIP3: +5dBm
- External Reference Frequency: 100MHz
- Switching Time: 100 ns
- Internal BIT
General Specifications
- 3U VPX/SOSA Compatible
- Environmental: MIL-STD-810F
- EMI/EMC: MIL-STD-461F
- Power consumption: 60W
- Operating: -40⁰ C t0 +85⁰ C
- Conduction Cooled
EiBWs-x012
DC-18 GHz Down Converter Series
Receive Specifications
- 3 x RF inputs
- 400MHz to 2GHz
- 2GHz-6GHz
- 6GHz-18GHz
- 9 x RF outputs
- 1 x Pass Through 400MHz-2GHz
- 8 x IF Frequency 3GHz-5GHz
- iBW – 18GHz
- SFDR: > 60dBc
- Gain: 18dB +/-3dB
- Gain Control: 0-60dB, 0.5dB steps
- Noise Figure < 12dB
- IIP1: -10dBm
- IIP3: +5dBm
- External Reference Frequency: 100MHz
- Internal BIT
General Specifications
- 3U VPX/SOSA Compatible
- Environmental: MIL-STD-810F
- EMI/EMC: MIL-STD-461F
- Power consumption: 45W
- Operating: -40⁰ C t0 +85⁰ C
- Conduction Cooled
30 – 6000 MHz T/R Modules Suite
The EiBW6 Suite integrates 2 modules, a 30-530MHz T/R and 500-6000 T/R including powerful 10W CW SSPA with high signal purity. Both modules in 3U VPX and compatible with SOSA™. Innovative design from the ground up provides the ultimate performance for C5I and COMMINT applications for all domains.
The suite’s modules can be integrated with an SDR module that together deliver the ultimate Transceiver for both communication and COMMINT applications.
EiBWs-x017
30 - 530 MHz T/R Module
Receive Specifications
- 1 x RF inputs
- 30MHz – 530MHz
- 4 x RF outputs
- 30MHz – 530MHz
- SFDR: > 100dBc
- Gain: 27dB +/-4dB
- Gain Control: 0-30dB, 1dB steps
- Noise Figure: < 8dB
- IIP1: -10dBm
- IIP3: +5dBm
- Switching Time: 100 ns
- Internal BIT
Transmit Specifications
- 1 x RF Input
- 30-530MHz
- 1 x RF Tx output
- 30-530MHz
- Output Power: 10W CW
- Gain: 40dB
- Gain Control: 0-30dB, 1dN steps
- Forward and Revers Detectors
General Specifications
- Environmental: MIL-STD-810F
- EMI/EMC: MIL-STD-461F
- Power consumption: 35W
- Operating: -40⁰ C t0 +85⁰ C
EiBWs-x018
500 - 6000 MHz T/R Module
Receive Specifications
- 2 x RF inputs
- 500MHz – 2500 MHz
- 4 x RF outputs
- 30MHz to 530MHz
- SFDR: > 100dBc
- Gain: 27dB +/-4dB
- Gain Control: 0-30dB, 1dB steps
- Noise Figure: < 8dB
- IIP1: -10dBm
- IIP3: +5dBm
- Switching Time: 100 ns
- Internal BIT
Transmit Specifications
- 1 x RF Input
- 30-530MHz
- 1 x RF Tx output
- 30-530MHz
- Output Power: 10W CW
- Gain: 40dB
- Gain Control: 0-30dB, 1dN steps
- Forward and Revers Detectors
General Specifications
- Environment: MIL-STD-810F
- EMI/EMC: MIL-STD-461F
- Power consumption: 35W
- Operating: -40⁰ C t0 +85⁰ C
mmWSynt-x007
Wide BW DC-32GHz Multi-Band Synthesizer
Wide frequency multiple clocks synthesizer module covering DC to 32GHz for Sea, Land and Airborne applications. This small size, high accuracy clock module was specially designed for the most demanding SWaP-c requirements. With a weight of less than 1Kg (<36Oz.) and small footprint, this synthesizers module can generate up to 10 different clocks in the frequency range of DC up to 32GHz. Extensive switching mechanism provides multiple options to get different or the same clocking frequency in the various outputs. Fast settling time of less than 1µS support the most demanding real time applications.
- 10 Synthesizers
- Settling time: 1µS
- Outputs Amplitude: 5-10dBm
- Outputs harmonics: -25dBc
- Phase Matching: 5⁰
- G-Sensitivity: ±1 ppb/g
- Frequency Stability: ±50 ppb
- Isolation: 60 dB
- Power Consumption: 20 W
- Temp Range: -55°c – 88°c
- MIL-STD 461/810
EhPAm-x005
6-18 GHz 50W SSPA
Wide Band CW SSPA for Sea, Land and Airborne applications. This small size, high efficiency module was specially designed for the most demanding SWaP-c requirements. With a weight of less than 500gr (<18Oz.) and footprint of a smart phone, this SSPA delivers 50W of continuous power throughout of up to 2GHz pre-defined iBW in the entire frequency range (6Ghz-18Ghz).
- 6-18 GHz SSPA
- 50W CW
- Wide Bandwidth
- Harmonics rejection: -30dBc
- Weight : 500gr/1.1lb.
- Power Consumption: 280W
- Low Power Mode:30dBm
- MIL-STD 461/810
